|
|
Usage Notes:
- Pouches should be placed parallel to each other in sterilization racks that hold the product upright on its side.
- Pouches should be placed paper-to-film with a finger's width of space between.
- Write on film side only with a permanent marker.
- Folding pouches is not recommended.
|
Heat Seal Pouches Provide Ease of Use
- No scissors needed and only one end to heat seal!
- FDA-registered medical grade paper-backed pouches with polyester/ polypropylene laminated film
- Blue-tinted film laminate helps to identify holes or tears
- Triple rail seal on three sides of pouch for maximum integrity
- Rounded corners for ease of opening and to reduce tearing
- Designed for Steam and Ethylene Oxide autoclaves
- To be sealed at 320° F - 390° F
- Validated to perform per ANSI/AAMI ST7: 2006 and A1:2008, S2:2009 standards including Double Pouching
- Indicator ink is water-based and latex-free:
~ Steam: pink print turns brown after processing
~ Ethylene Oxide: blue print turns yellow/green after processing
- 3 year shelf life
|
| Item Number |
Description |
Quantity |
| HSSP142210 |
3"x8" Heat Seal Steriilzation Pouches |
250 ea/pkg, 8 pkg/cs |
| HSSP142215 |
4"x8" Heat Seal Sterilization Pouches |
250 ea/pkg, 8 pkg/cs |
| HSSP142220 |
4.75"x10" Heat Seal Sterilization Pouches |
250 ea/pkg, 8 pkg/cs |
| HSSP142222 |
4.75"x11" Heat Seal Sterilization Pouches |
250 ea/pkg, 8 pkg/cs |
| HSSP142225 |
6"x10" Heat Seal Sterilization Pouches |
250 ea/pkg, 8 pkg/cs |
| HSSP142230 |
6"x15" Heat Seal Sterilization Pouches |
250 ea/pkg, 8 pkg/cs |
| HSSP142245 |
8"x13" Heat Seal Sterilization Pouches |
250 ea/pkg, 4 pkg/cs |
| HSSP142255 |
12"x15" Heat Seal Sterilization Pouches |
250 ea/pkg, 4 pkg/cs |
|
Heat Seal Sterilization Pouches |
Usage Notes:
- Pouches should be placed parallel to each other in sterilization racks that hold the product upright on its side.
- Pouches should be placed paper-to-film with a finger's width of space between.
- Write on film side only with a permanent marker.
- Folding pouches is not recommended.
|
Heat Seal Reels Allow for Custom Sizes
- Reduce waste by cutting to fit instruments
- FDA-registered medical grade paper-backed pouches with polyester/ polypropylene laminated film
- Blue-tinted film laminate helps to identify holes or tears
- Triple rail seal on three sides of pouch for maximum integrity
- Rounded corners for ease of opening and to reduce tearing
- Designed for Steam and Ethylene Oxide autoclaves
- To be sealed at 320° F - 390° F
- Validated to perform per ANSI/AAMI ST7: 2006 and A1:2008, S2:2009 standards including Double Pouching
- Indicator ink is water-based and latex-free:
~ Steam: pink print turns brown after processing
~ Ethylene Oxide: blue print turns yellow/green after processing
- 3 year shelf life
|
| Item Number |
Description |
Quantity |
| MHSR14210S |
3"x100ft Heat Seal Reel |
8 reels/cs |
| MHSR14215S |
4"x100ft Heat Seal Reel |
16 reels/cs |
| MHSR14220S |
6"x100ft Heat Seal Reel |
8 reels/cs |
| MHSR14222S |
8"x100ft Heat Seal Reel |
4 reels/cs |
| MHSR14225S |
10"x100ft Heat Seal Reel |
4 reels/cs |
|
 |
Heat Sealer Accessory
- For use with heat-seal pouches and reels
- 120 volt electrical unit
- Fast warm up
- Makes a seal of 1/2" wide and up to 18" long, in 2.5 seconds
- Easy to use - place pouch in seal area and lift safety bar. Safety bar automatically lowers and releases sealed pouch
- Gray
Product: Rennco Heat Sealer Accessory, 120v
Item # MRHS142NCO
Quantity: 1 ea/cs
Dimensions: 12" x 21" x 10"
|
 |
Reel Cutter and Dispenser Accessory
- Holds, dispenses and cuts heat-seal reels into custom sized tubes
- Easy to use
- Gray
Product: Reel Cutter and Dispenser Accessory
Item # MARC14270R
Quantity: 1 ea/cs
|
Reel Cutter and Dispenser Accessory |
|
